Active Crossover Circuit
Given below is an Active crossover circuit suitable for HiFi audio systems using LM833, the dual operational amplifier.
Description:
Crossover circuits are of two types, active and passive. Passive crossover circuit uses passive components only and they are very simple, but they waste a considerable amount of energy and also induce distortion. Active crossovers does not have the above said draw backs and they are a better option for HiFi audio systems. Active crossovers split the incoming complex audio signal into to two bands, a low frequency out and a high frequency out. These two bands a separately amplified by two power amplifier stages, one tuned to the low frequency band and the other tuned to high frequency stage respectively (bi-amping).
The cross over circuit given here uses LM833 National Semiconductors. LM833 is a dual operational amplifier especially designed for audio applications. The circuit requires four opamps and so two LM833 ICs are used here. The circuit can be divided into two parts, a high pass filter section and a low pass filter section. IC2b forms a first order Butterworth low pass filter circuitry and the low frequency out is available at its output pin (pin1). The high frequency out is available at pin 7 of IC1a. For the given components crossover frequency is 1KHz and it is according to the equation Fc = 1/(2πRC).
Active Crossover Circuit Diagram:
Notes:
- Assemble the circuit on a good quality PCB.
- The circuit can be powered using a +15/-15 V DC dual supply.
- LM833s must be mounted on holders.
- R and C can be changed for getting different crossover frequencies.
Share this on your favourite network
0 comments:
Post a Comment